document number: 89025 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 19-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount esd capability rectifiers se15pb thru se15pj vishay general semiconductor new product typical applications general purpose, polarity pr otection, and rail-to-rail protection in both consumer and automotive applications. features ? very low profile - typical height of 1.0 mm ? ideal for automated placement ? oxide planar chip junction ? low forward voltage drop ? typical i r less than 0.1 a ? esd capability ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to ie c 61249-2-21 definition mechanical data case: do-220aa (smp) molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs compliant, and commercial grade base p/nhm3 - halogen-free, rohs compliant, and automotive grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 m3 suffix meets jesd 201 class 1a whisker test, hm3 suffix meets jesd 201 class 2 whisker test primary characteristics i f(av) 1.5 a v rrm 100 v to 600 v i r 5 a v f at i f = 1.0 a 0.868 v t j max. 175 c do-220aa ( s mp) e s mp ? s eries maximum ratings (t a = 25 c unless otherwise noted) parameter symbol se15pb se15pd SE15PG se15pj unit device marking code 15b 15d 15g 15j maximum repetitive peak reverse voltage v rrm 100 200 400 600 v average forward current (fig. 1) i f(av) 1.5 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 30 a operating junction and storage temperature range t j , t stg - 55 to + 175 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 89025 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 19-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 se15pb thru se15pj vishay general semiconductor new product notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms note (1) thermal resistance from junction to ambien t and junction to lead mounted on pcb with 5.0 mm x 5.0 mm copper pad areas. r ? jl - is measured at the terminal of cathode band. r ? jc is measured at the top center of the body. notes (1) immunity to iec 61000-4-2 air dischar ge mode has a typical performance > 30 kv (2) system esd standard note (1) automotive grade electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit maximum instantaneous forward voltage i f = 1.5 a t a = 25 c v f (1) 0.968 1.05 v t a = 125 c 0.868 0.95 maximum reverse current rated v r t a = 25 c i r (2) -5.0 a t a = 125 c 5.4 50 maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 900 - ns typical junction capacitance 4.0 v, 1 mhz c j 9.5 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol se10pb se10pd se10pg se10pj unit typical thermal resistance r ? ja (1) 105 c/w r ? jl (1) 25 r ? jc (1) 30 immunity to electrical static discharge to the following standards (t a = 25 c unless otherwise noted) standard test type test conditions symbol class value aec-q101-001 human body model (c ontact mode) c = 100 pf, r = 1.5 ? v c h3b > 8 kv aec-q101-002 machine model (contact mode) c = 200 pf, r = 0 ? m4 > 400 kv jesd22-a114 human body model (con tact mode) c = 150 pf, r = 1.5 ? 3b > 8 kv jesd22-a114 machine model (con tact mode) c = 200 pf, r = 0 ? c > 400 kv iec 61000-4-2 (2) human body model (contact mode) c = 150 pf, r = 150 ? 4> 8 kv human body model (air -discharge mode) (1) c = 150 pf, r = 150 ? 4 > 15 kv ordering information (example) preferred p/n unit weight (g) preferred pa ckage code base quantity delivery mode se10pj-m3/84a 0.024 84a 3000 7" diam eter plastic tape and reel se10pj-m3/85a 0.024 85a 10 000 13" diameter plastic tape and reel se10pjhm3/84a (1) 0.024 84a 3000 7" diameter plastic tape and reel se10pjhm3/85a (1) 0.024 85a 10 000 13" diameter plastic tape and reel
document number: 89025 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 19-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 se15pb thru se15pj vishay general semiconductor new product ratings and characteristics curves (t a = 25 ? c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - forward power loss characteristics fig. 3 - forward power loss characteristics fig. 4 - typical instantaneous forward characteristics fig. 5 - typical instantaneous forward characteristics 0 0.5 1.0 1.5 2.0 0 25 50 75 100 125 175 150 lead temperat u re (c) average forward c u rrent (a) t l meas u red at the cathode band terminal resistive or ind u ctive load 0.2 0 0.4 0.8 0.6 1.2 1.4 1.0 1.6 1.8 0 0.2 0.4 0.8 0.6 1.2 1.0 1.6 1.8 1.4 average forward c u rrent (a) average power loss (w) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0 d = t p /t t p t instantaneo u s forward v oltage ( v ) instantaneo u s forward c u rrent (a) 10 1 0.1 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 t j = 175 c t j = 150 c t j = 25 c 100 10 1 0.1 0.01 10 20 30 40 50 60 70 80 90 100 percent of rated peak reverse v oltage (%) instantaneo u s reverse c u rrent (a) t j = 175 c t j = 150 c t j = 25 c reverse v oltage ( v ) j u nction capaci tance (pf) 100 10 1 0.1 1 10 100 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 89025 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 19-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 se15pb thru se15pj vishay general semiconductor new product package outline dimensions in inches (millimeters) do-220aa ( s mp) cathode band 0.06 (2.1) 0.04 (1.) 0.142 (.61) 0.126 (.19) 0.15 (4.00) 0.146 (.0) 0.01 (0.5) 0.004 (0.10) 0.012 (0.0) 0.000 (0.00) 0.01 (0.45) 0.006 (0.15) 0.045 (1.15) 0.0 (0.5) 0.06 (0.91) 0.024 (0.61) 0.02 (0.0) 0.016 (0.40) 0.10 (2.60) 0.0 (2.20) 0.05 (1.5) 0.041 (1.05) 0.012 (0.0) ref. 0.100 (2.54) 0.105 (2.6) 0.025 (0.65) 0.00 (0.62) 0.050 (1.2)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
